Secondary Infection Equipment for Relay Testing

  PTE - 100 - C

 

Current and voltage relay testing unit to 250A

MAIN FEATURES :

  • Current output up to 250 A in 4 ranges.
  • AC voltage output from 0 to 250 V (4 A).
  • DC voltage output from 0 to 350 V (2.8 A).
  • Auxiliary DC power supply up to 250 V.
  • Built-in timer, 1ms resolution.
  • Output power: 1000 VA.
  • Electronic protection in all outputs.
  • Special control functions.
  • Special measurement functions.
  • Case: IP-65.
  • Dimensions: 200 x 300 x 200 mm / 13.5 kg. 8 x 12 x 8 in / 30 lb.

 

 PTE - 100 - C Plus

 

Single Phase Relay testing unit

The PTE-100-C Plus can test all single phase relays,
electromechanical to digital.

MAIN FEATURES :

  • Selectable power outputs:
      · Variable AC current output up to 0-250 A.
      · Variable AC voltage output up to 0-250 V.
      · Variable DC voltage output up to 0-350 V.
  • Variable auxiliary voltage supply 0-250 V DC.
  • Variable AC voltage 0-140 V.
  • Variable Frequency 40-70 Hz.
  • Variable Phase Angle 0-360°.
  • Isolated and electronically protected outputs.
  • 1ms resolution chronometer.
  • External and internal signal measurement : voltmeter, ammeter, frequency meter, power meter, impedance meter and phase meter.
  • Elapsed injection time limit control.
  • Maximum current output limit control.
  • Output current preset function.
  • RS-232 communications port.
  • Interconnection with EuroSMC exclusive PTE-BUS.
  • Case: IP-65.
  • Dimensions: 200 x 300 x 200 mm / 15.5 kg. · 8 x 12 x 8 in   / 35 lb.

 

 PTE - 100 - C Pro

 

Single Phase Relay test unit with an independent voltage module

The PTE-100-C Pro with LCD display incorporated.

DESCRIPTION :

     The PTE-100-C Pro combines the basic unit PTE-100-C with the voltage supply module PTE-FCN. This is incorporated in PTE-100-C cover lid, and allows, regulated AC voltage, frequency, and phase angle. The values which are presented in the LCD display are highly accurate, easy to read, and independenent of the injection made by the PTE-100-C base unit.

    The display shows continuously the phase difference between the voltage and the current injected, and can be adjusted during the test with an accuracy of 0.1º. This facilitates the test for directional relays or in re-connecters, and synchronizing relays, etc. The protection tests based on variable frequency are simple and direct, due to the variable frequency between 40 and 70 Hz incorporated in the module.

MEASURES :

 

 

 PTE - 100 - V

 

Single phase relay test set Voltage / Current

MAIN FEATURES :

  • Output power 100 VA.
  • Variable voltage up to 300 V.
  • Variable curent up to 8 A.
  • Variable phase angle between 0 - 360º.
  • Variable frequency from 40 to 420 Hz.
  • Internal program to ramp frequency.
  • External current or voltage reference input.
  • RS-232 and PTE-BUS Connections.
  • External timer control output.
  • Monitor input to detect relay trips, dry or wet contact.
  • Internal program to realize dymanic pre-fault and fault in   both output level and phase angle.
  • Electronic generation up to 3 kHz isolated from the main supply.
  • Output stablized by microprocesor.
  • Overload and thermal alarms, electronicaly protected.
  • Case: IP-65.
  • Dimensions: 200 x 300 x 200 mm / 13.5 kg. /8 x 12 x 8 in / 30 lb.

 

 PTE - 50 -CE

 

Reversible 100-VA current / voltage output with variable phase angle, digital chronometer and programmable harmonics generation.

CHARACTERISTICS :

  • 100-VA output power.
  • Variable current: 0.000 – 50.00 A.
  • Variable voltage: 0.000 – 150.0 V.
  • Variable phase angle: 0.0 – 359.9º.
  • Digital programmable chronometer with 1-ms resolution.
  • Dry N/O, N/C or voltage-charged operation contact detection
  • Programmable dynamic pre-fault / fault step function.
  • Harmonics generation between 50 and 420 Hz.
  • Electronic overload and overheating protections.
  • External synchronization signal input.
  • RS-232 communications for software-based testing.
  • PTE Bus® for interconnection with other PTE units.
  • IP-65 protective casing.
  • Dimensions: 8 x 12 x 8 in. / Weight: 30 lb.